It's also possible that there is a problem with your card itself. More than enough for problems to show up on one card but not on the other. That's a pretty significant difference of 150w. The RX570 has a 500w minimum recommendation. The HD 7750 only needs a good 350w power supply based on recommendations from RealhardtechX. That was a good unit when it was new, but there is a big difference in power consumption between the RX570 and the HD7750. If the system will POST and boot then you can move forward from there including going back into the bios and configuring any other custom settings you may need to configure such as Memory XMP profile settings, custom fan profile settings or other specific settings you may have previously had configured that were wiped out by resetting the CMOS. ![]() Enter the bios setup program and reconfigure the boot settings for either the Windows boot manager or for legacy systems, the drive your OS is installed on if necessary. It should display the POST screen and the options to enter CMOS/BIOS setup. Now, plug the power supply cable back in, switch the PSU back on and power up the system. After the five minutes is up, reinstall the CMOS battery making sure to insert it with the correct side up just as it came out. During that five minutes, press the power button for 30 seconds. Remove the motherboard CMOS battery for five minutes. Power off the unit, switch the PSU off and unplug the PSU cord from either the wall or the power supply. The other things you really want to do are to make absolutely sure you have the latest motherboard bios version installed, especially since you have an early Ryzen chipset motherboard, and also possibly resetting the hardware tables by doing a hard reset of the BIOS as follows, AFTER you update the bios successfully. *Graphics card CLEAN install tutorial using the DDU* Have you done a CLEAN install of the AMD drivers using the DDU? Even if you had the same family of card before (AMD for AMD, or Nvidia to Nvidia) but especially if you changed from one camp to the other, removing ALL previous drivers (Which might require running it once for the type of old card that was installed, say, Nvidia, if that is what the old card was, and then again for AMD since you've installed drivers that are likely borked right now) and then performing a fresh install of the very latest drivers, is usually a very good idea and tends to resolve a heck of a lot of issues that just installing the latest drivers OR using AMD's supposed "clean" install option does not fix. What do you think could be the problem? PSU, Motherboard? I don't really have replacements at hand to swap them out, is there anything else I can do to test them? ![]() Even tried a different monitor, with obviously no result. Formatting my SSD and reinstalling Windows also didn't change anything. I also did a memtest that didn't find any errors. Tried using one stick at a time thinking maybe one was faulty, but no improvements. I checked the temperatures and everything seemed normal, so I assumed it could be a RAM issue. A couple of times I discovered that after the crash the power buttons on my case weren't working, and had to shut down the PC from the PSU switch.Īfter doing all the various Win 10 troubleshoots I thought it was due to overheating (I had a very old GPU) but after replacing it the problem persisted. Very rarely I get a BSOD, or the pc freezes while the monitor still has signal. It appears to be completely random: sometimes it happens once a day, sometimes multiple times in a row, whether I'm gaming or just web browsing. ![]() ![]() As per title the monitor loses signal and the PC seems to crash after a few seconds (if I have audio playing, I will keep hearing it fine for a little while before it stops). Hey guys, I've been driven absolutely mad by this problem that has kept happening for a few months, and nothing I do seems to solve it.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |